- This topic has 1 reply, 1 voice, and was last updated 19 years, 3 months ago by .
Viewing 2 posts - 1 through 2 (of 2 total)
Viewing 2 posts - 1 through 2 (of 2 total)
- The forum ‘Boat Construction’ is closed to new topics and replies.
Home › Forums › Development & Design › Boat Construction › Fibreglass Moulds
Has any of the state associations obtained a Sabre Fibreglass mould for it’s member to use. In Qld the 125 association has a 125 mould and talking to there memebers who have built boats from both ply and fibreglass, they all agreed that using a mould for a fibreglass hull with a timber topside is by far the easiest method of construction. :
Shane
Shane.
No State Assoc other than Victoria owns a mould.
There are a number of professional builders with their own moulds.
Whilst Vic own the mould, it is used under licence and maintained by a professional builder…Robert Botterill & Sons who do make glass hulls with timber decks. Alan Riley’s (Nat’l champion) is one of these.
A list of professional builders and contact details is on this web site…see “Boats and Equipment”
Barry Eastgate
1611